Roland SC-88 Pro ■Creating and saving an Insertion effect (User Effect), A01 01x Stereo-EQ, ●Saving a User Effect, 4.To store the data, press [ALL]

■Creating and saving an Insertion effect (User Effect)

Insertion effect parameter settings that you make can be saved in memory. An Insertion effect that you save in this way is referred to as a User Effect. 64 User Effects can be stored.

*For the function of each parameter, refer to the applicable page. (p.57)

●Saving a User Effect1.Set the Insertion effect parameters.

(“Insertion effect settings,” p.56)

2.Press the [EFX] button to make the indicator light orange.

Caution is required at this point-- if you happen to change the effect type, all the effect parameters will revert to their defaults.

3.Simultaneously press [EFX] and [ON/OFF].

The display will ask “Write U.EFX 01?” Use INSTRUMENT [l][r] to select the number (01 to 64) where you wish to store the data.

4.To store the data, press [ALL].

To cancel without storing, press [MUTE].

5.Press [EFX] to turn off the indicator and complete the procedure.

4

			PART	INSTRUMENT
		ALL		3
			LEVEL	PAN
		MUTE
			REVERB	CHORUS
		SC-55
		MAP	KEY SHIFT	MIDI CH
		SC-88
	3	MAP
			DELAY
		VIB RATE	VIB DEPTH	VIB DELAY
USER			CUTOFF	RESONANCE
INST	SELECT	ATTACK	DECAY	RELEASE
EFX	ON/OFF	EFX TYPE	EFX PARAM	EFX VALUE

2 5

To load the User Effect that was stored, use the following procedure.

1.Press the [ALL] button to make the indicator light orange.

2.Press EFX TYPE [r] to display 64 PH/Auto Wah.

3.Then press EFX TYPE [r], and the User effect will be selected.

The “X” symbol of the effect number indicates that this is a User effect.

PART INSTRUMENT

A01 01x Stereo-EQ

LEVEL	PAN
100	0

Chapter 5. Convenient functions 99