Peak

0 - 127 [4]

Adjust the amount of the wah effect that will occur in the area of the center frequency. Lower settings will cause the effect to be applied in a broad area around the center frequency. Higher settings will cause the effect to be applied in a more narrow range. In the case of LPF, decreasing the value will cause the wah effect to change less.

#Rate

0.05 - 10.0

[5]

Adjust the speed of the modulation.

 

 

Depth

0 - 127

[6]

Adjust the depth of the modulation.

 

 

Polarity

Down/Up [7]

Set the direction in which the frequency will change when the filter is modulated. With a setting of Up, the filter will change toward a higher frequency. With a setting of Down it will change toward a lower frequency.

Low Gain

-12 - +12 [17]

Adjust the gain of the low frequency range for EQ.

Hi Gain (High gain)

-12 - +12 [18]

Adjust the gain of the high frequency range for EQ.

Pan (Output pan)

L63 - 0 - R63 [19]

Adjust the stereo location of the output sound. L63 is far left, 0 is center, and R63 is far right.

Level (Output level)

0 - 127 [20]

Adjust the output level.

 

 

 

9: Rotary

[01H, 22H]

The Rotary effect simulates the sound of a classic rotary speakers. Since the movement of the high range and low range rotors can be set independently, the unique type of modulation characteristic of these speakers can be simulated quite closely. This effect is most suitable for electric organ.

L

EQ

 

Rotary

R

EQ

Low Slow (Low frequency slow rate)

0.05 - 10.0 [1]

Adjust the slow speed (Slow) of the low frequency rotor.

Low Fast (Low frequency fast rate)

0.05 - 10.0 [2]

Adjust the fast speed (Fast) of the low frequency rotor.

Low Accl (Low frequency acceleration) 0 - 15 [3]

Adjust the time it takes for the low frequency rotor to reach the newly selected speed when switching from fast to slow (or slow to fast) speed. Lower values will require longer times.

Low Level (Low frequency level)

0 - 127 [4]

Adjust the volume of the low frequency rotor.

Hi Slow (High frequency slow rate)

0.05 - 10.0 [5]

Adjust the slow speed (Slow) of the high frequency rotor.

Hi Fast (High frequency fast rate) 0.05 - 10.0

[6]

Adjust the fast speed (Fast) of the high frequency

rotor.

 

 

Hi Accl (High frequency acceleration)

0 - 15

[7]

Adjust the time it takes for the high frequency rotor to reach the newly selected speed when switching from fast to slow (or slow to fast) speed. Lower values will require longer times.

Hi Level (High frequency level)

0 - 127 [8]

Adjust the volume of the high frequency rotor.

Separate (Separation)

0 - 127 [9]

Adjust the spatial dispersion of the sound.

+Speed

Slow/Fast [11]

Simultaneously switch the rotational speed of the low frequency rotor and high frequency rotor.

Slow : Slow down the rotation to the specified speed (the Low Slow parameter / Hi Slow parameter values).

Fast : Speed up the rotation to the specified speed (the Low Fast parameter / Hi Fast parameter values).

Low Gain

-12 - +12 [17]

Adjust the gain of the low frequency range for EQ.

Hi Gain (High gain)

-12 - +12 [18]

Adjust the gain of the high frequency range for EQ.

#Level (Output level)

0 - 127 [20]

Adjust the output level.

 

 

 

10: Stereo Flanger

[01H, 23H]

This is a stereo flanger. It produces a metallic resonance that rises and falls like a jet airplane taking off or landing. A filter is provided so that you can adjust the timbre of the flanged sound.

L EQ

Flanger

Balance

Flanger

R EQ

60

Chapter 4. Insertion Effects