Roland SC-88 Pro ■Using controllers to modify effect parameters, ALL >EFX C.Src1: Off, change, ●Setting procedure, Simultaneously press PART [l] and [r]

■Using controllers to modify effect parameters

Controllers can be used to modify the values of Insertion effect parameters.

Using MIDI messages to modify effect parameters during a song would require a large amount of data if you were to use only Exclusive messages. Thus, this unit allows you to use controllers to set the main effect parameters. Since you can use Control Change messages to modify parameter values, the amount of data will not be excessively large, even if you modify parameter values during a song.

Also, if you are using a keyboard etc. to play, you can use controllers to modify the values in realtime.

EFX C.Src1, 2 (Effect Control Source 1, 2)

EFX C.Dep1, 2 (Effect Control Depth 1, 2)

●Setting procedure

1.

2.

3.

Press [ALL] to make the button indicator light.

Simultaneously press PART [l] and [r].Press either [u] or [d] to select the parameter whose setting you wish tochange.

You can skip parameters by pressing [u][d], while holding [SELECT].

4. Use INSTRUMENT [l][r] to set the value.

PART	INSTRUMENT
ALL >EFX C.Src1: Off
LEVEL	PAN
100	0

5. When you finish making settings, simultaneously press PART [l] and [r] to end the procedure.

	1	2	5	4
		PART		INSTRUMENT
	ALL
		LEVEL		PAN
	MUTE
		REVERB		CHORUS
3	SC-55
	MAP	KEY SHIFT		MIDI CH
	SC-88
	MAP
		DELAY

92 Chapter 4. Insertion Effects