Roland SC-88 Pro manual 195

Section 3. Individual Parameter Transmission (Model ID=45H or 42H)

Individual Parameter Transmission transmits data (or requests data) for one parameter as one exclusive message (one packet of "F0 ..... F7").

In Individual Parameter Transmission, you must use the Address and Size listed in the following "Parameter Address Map". Addresses marked at "#" cannot be used as starting addresses.

■Address Block map

An outlined address map of the Exclusive Communication is as follows;

<Model ID = 45H>

Address(H) Block

10 00 00

Display Data

<Model ID = 42H>

●Port-A

Address(H)	Block		Address(H)	Block
00 00 00
	SYSTEM
20 00 00
	USER TONE BANK
21 00 00
	USER DRUM SET
22 00 00
	USER EFX
23 00 00
	USER PATCH COMMON
24 00 00
	USER PATCH PART
	(BLOCK 01)
25 00 00	USER PATCH PART
	(BLOCK 01)
26 00 00	USER PATCH PART
	(BLOCK 02)
27 00 00
	USER PATCH PART
	(BLOCK 02)
40 00 00	PATCH COMMON	#A	50 00 00	PATCH COMMON	B
40 10 00	PATCH PART	A	50 10 00	PATCH PART	B
	(BLOCK 00-0F)			(BLOCK 10-1F)
41 00 00	DRUM SETUP	A	51 00 00	DRUM SETUP	B

*The blocks displayed in gray cannot be accessed in Mode-1 (Single Module mode).

*Blocks listed as "#A" are parameter blocks which are common to the entire device in Mode-1, and valid only for Parts A01 - A16 in Mode-2 (Double Module mode).

● Port-B

Address(H)	Block		Address(H)	Block
00 00 00
	SYSTEM
20 00 00
	USER TONE BANK
21 00 00
	USER DRUM SET
22 00 00
	USER EFX
23 00 00
	USER PATCH COMMON
24 00 00
	USER PATCH PART
	(BLOCK01)
25 00 00	USER PATCH PART
	(BLOCK01)
26 00 00	USER PATCH PART
	(BLOCK02)
27 00 00
	USER PATCH PART
	(BLOCK02)
50 00 00			40 00 00
	PATCH COMMON	A		PATCH COMMON	#B
50 10 00
	PATCH PART	A	40 10 00	PATCH PART	B
	(BLOCK 00-0F)			(BLOCK 10-1F)
51 00 00			41 00 00
	DRUM SETUP	A		DRUM SETUP	B

*The blocks displayed in gray cannot be accessed in Mode-1 (Single Module mode).

*Blocks listed as "#B" are parameter blocks which are common to the entire device in Mode-1, and valid only for Parts B01 - B16 in Mode-2 (Double Module mode).

■Parameter address map

This map indicates address, size, Data (range), Parameter, Description, and Default Value of parameters which can be transferred using "Request data 1 (RQ1)" and "Data set 1 (DT1)".All the numbers of address, size, Data, and Default Value are indicated in 7-bit Hexadecimal-form. Numbers in the explanatory column are given in decimal notation. The MODEL ID = 45H parameters are related to LCD display.

The MODEL ID = 42H parameters at address 5* ** ** are not given in this map. The parameters for address 5* ** ** are the same format as those at at address 4* ** **.

<MODEL ID = 45H > ● Display data

Address(H)		Size(H)	Data(H)	Parameter	Description	Default Value(H)
10 00	00	00 00 20	20-7F	Displayed Letter	32-127(ASCII)	---
10 00	01#
10 00	02#
:
10 00	1F#

*When this message is received, a character string specified by the data will be temporarily displayed in the INSTRUMENT display area. A character string of 1 to 32 characters can be received. If more than 16 characters are received, the display will automatically be scrolled.

Address(H)		Size(H)	Data(H)	Parameter	Description	Default Value(H)
10 0p	00	00 00 40	00-1F	Displayed
				Dot Data d00	00-31	--
10 0p	01#			Dot Data d01
10 0p	02#			Dot Data d02
10 0p	:		:	Dot Data :
10 0p	3F#			Dot Data d63
(p:Page#			p=1:Page1, p=2:Page3, p=3:Page5, p=4:Page7, p=5:Page9)
10 0p	40	00 00 40	00-1F	Displayed
				Dot Data d00	00-31	--
10 0p	41#			Dot Data d01
10 0p	42#			Dot Data d02
10 0p	:			Dot Data :
10 0p	7F#			Dot Data d63
(p:Page#			p=1:Page2, p=2:Page4, p=3:Page6, p=4:Page8, p=5:Page10)

*When this message is displayed, screen data (16 x 16 dot)corresponding to the bit pattern of the Displayed Dot Data will be stored in this unit internal memory. The correspondence between data and dots is given below. The screen data which is stored can be displayed by transmitting a message for address 10 20 00.

*Only in the case of Page 1, the screen data will be temporarily displayed immedi- ately after this message is received.

bit

4

3

2

1

0

4

3

2

1

0

4

3

2

1

0

4

[ *

* d00 *

* ]

[ *

* d16 *

* ]

[ *

* d32 *

* ]

[d48]

[ *

* d01 *

* ]

[ *

* d17 *

* ]

[ *

* d33 *

* ]

[d49]

[ *

* d02 *

* ]

[ *

* d18 *

* ]

[ *

* d34 *

* ]

[d50]

[ *

* d03 *

* ]

[ *

* d19 *

* ]

[ *

* d35 *

* ]

[d51]

[ *

* d04 *

* ]

[ *

* d20 *

* ]

[ *

* d36 *

* ]

[d52]

[ *

* d05 *

* ]

[ *

* d21 *

* ]

[ *

* d37 *

* ]

[d53]

[ *

* d06 *

* ]

[ *

* d22 *

* ]

[ *

* d38 *

* ]

[d54]

[ *

* d07 *

* ]

[ *

* d23 *

* ]

[ *

* d39 *

* ]

[d55]

[ *

* d08 *

* ]

[ *

* d24 *

* ]

[ *

* d40 *

* ]

[d56]

[ *

* d09 *

* ]

[ *

* d25 *

* ]

[ *

* d41 *

* ]

[d57]

[ *

* d10 *

* ]

[ *

* d26 *

* ]

[ *

* d42 *

* ]

[d58]

[ *

* d11 *

* ]

[ *

* d27 *

* ]

[ *

* d43 *

* ]

[d59]

[ *

* d12 *

* ]

[ *

* d28 *

* ]

[ *

* d44 *

* ]

[d60]

[ *

* d13 *

* ]

[ *

* d29 *

* ]

[ *

* d45 *

* ]

[d61]

[ *

* d14 *

* ]

[ *

* d30 *

* ]

[ *

* d46 *

* ]

[d62]

[ *

* d15 *

* ]

[ *

* d31 *

* ]

[ *

* d47 *

* ]

[d63]

1

2

3

4

5

6

7

8

9

10

11

12 13 14

15

16

*For example, [ * * d00 * * ] indicates the five dots in the upper left of the display.

*The bit pattern of bits 4 - 0 (lower 5 bits) of the data byte turns the dots on/off. However in the case of d48 - d63, only bit 4 turns the dot on/off.

d00: 0--*****
d01: 0--*****
d47: 0--*****
d48: 0--*----
			*: dot is unlit for 0, lit for 1
d63: 0--*-----: dot display is not affected whether this is 0 or 1
Address(H)	Size(H)	Data(H)	Parameter	Description		Default Value(H)
10 20 00	00 00 01	00-0A	Display Page	00:Bar Display		--
				01:Page1
				:	:
				0A:Page10		--

*When this message is received, the display (page) specified by Display Page (address 10 20 00) will be displayed for the duration of the time specified by the fol- lowing Display Time (address 10 20 01).

10 20 01 00 00 01 00-0F Display Time 0-7.2 [sec] 06 (2.88 [sec])

Chapter 8. Appendix 193