Roland SC-88 Pro manual 78

Cho Rate (Chorus rate ) 0.05 - 10.0 [2]

Adjust the modulation speed of the chorus effect.

Cho Depth (Chorus depth ) 0 - 127 [3]

Adjust the modulation depth of the chorus effect.

+Cho Bal (Chorus balance ) D> 0E - D 0<E [5]

Adjust the volume balance between the direct sound and the chorus sound. With a setting of “D> 0E,” only the direct sound will be output. With a setting of “D 0<E,” only the chorus sound will be out- put.

“D” or “E” on the display respectively means D(direct sound) or E(effect sound) values of 100.

Dly Time (Delay time ) 0 - 500m [6]

Adjust the time delay from when the direct sound begins until the delay sound is heard.

Dly Fb (Delay feedback level ) -98% - +98% [7]

Adjust the proportion (%) of the delay sound that is fed back into the delay input. Negative (-) settings will invert the phase.

Dly HF (Delay HF damp ) 315 - 8k/Bypass [8]

Adjust the frequency above which delayed sound fed back to the delay input will be cut. If you do not wish to cut the high frequencies of the feedback, set this parameter to Bypass.

#Dly Bal (Delay balance ) D> 0E - D 0<E [10]

Adjust the volume balance between the sound which passes through the delay and the sound which does not. With a setting of D>0E, only the chorus sound will be output, and with a setting of D 0<E, the chorus sound which passes through the delay will be output.

“D” or “E” on the display respectively means D(direct sound) or E(effect sound) values of 100.

Low Gain	-12	- +12 [17]
Adjust the low frequency gain.
Hi Gain (High gain )	-12	- +12 [18]
Adjust the high frequency gain.
Level (Output level )	0	- 127 [20]
Adjust the output level.
45: FL → Delay (Flanger → Delay)	[02H, 0AH]

This effect connects a flanger and a delay in series.

L	EQ
Flanger	Delay
R	EQ
FL Dly (Flanger pre delay )	0 - 100m [1]

Adjust the time delay from when the direct sound begins until the flanger sound is heard.

FL Rate (Flanger rate ) 0.05 - 10.0 [2]

Adjust the modulation speed of the flanger effect.

FL Depth (Flanger depth ) 0 - 127 [3]

Adjust the modulation depth of the flanger effect.

+FL Fb (Flanger feedback level )

-98% - +98% [4]

Adjust the proportion (%) of the flanger sound that is fed back into the effect. Negative (-) settings will invert the phase.

FL Bal (Flanger balance ) D> 0E - D 0<E [5]

Adjust the volume balance between the direct sound and the flanger sound. With a setting of “D> 0E,” only the direct sound will be output. With a setting of “D 0<E,” only the flanger sound will be out- put.

“D” or “E” on the display respectively means D(direct sound) or E(effect sound) values of 100.

Dly Time (Delay time ) 0 - 500m [6]

Adjust the time delay from when the direct sound begins until the delay sound is heard.

Dly Fb (Delay feedback level ) -98% - +98% [7]

Adjust the proportion (%) of the delay sound that is fed back into the delay input. Negative (-) settings will invert the phase.

Dly HF (Delay HF damp ) 315 - 8k/Bypass [8]

Adjust the frequency above which delayed sound fed back to the delay input will be cut. If you do not wish to cut the high frequencies of the delay feed- back, set this parameter to Bypass.

#Dly Bal (Delay balance ) D> 0E - D 0<E [10]

Adjust the volume balance between the sound which passes through the delay and the sound which does not. With a setting of D>0E, only the flanger sound will be output, and with a setting of D 0<E, the flanger sound which passes through the delay will be output.

“D” or “E” on the display respectively means D(direct sound) or E(effect sound) values of 100.

Low Gain	-12 - +12	[17]
Adjust the low frequency gain.
Hi Gain (High gain )	-12 - +12	[18]
Adjust the high frequency gain.
Level (Output level )	0 - 127	[20]
Adjust the output level.
46: Cho → Flanger (Chorus →	Flanger)
	[02H, 0BH]

This effect connects a chorus and a flanger in series.

L	EQ
Chorus	Flanger
R	EQ

76 Chapter 4. Insertion Effects