Low Gain

-12 - +12 [17]

Adjust the gain of the low frequency range.

Hi Gain (High gain)

-12 - +12 [18]

Adjust the gain of the high frequency range.

Level (Output level)

0 - 127 [20]

Adjust the output level.

 

 

 

27: Gate Reverb

[01H, 56H]

Gate Reverb is a special type of reverb in which the reverberant sound is cut off before its natural length.

L EQ

Reverb Balance

R EQ

Type (Gate reverb type) Norm/Reverse/Sweep1/2 [1]

Select the type of reverb.

Norm : conventional gate reverb

Reverse : backwards reverb

Sweep1 : the reverberant sound moves from right to left

Sweep2 : the reverberant sound moves from left to right

Pre Dly (Pre delay time)

0 - 100m [2]

Adjust the time delay from when the direct sound begins until the reverb sound is heard.

Gate Time

5 - 500m [3]

Adjust the time from when the reverb is heard until when it disappears.

+Balance (Effect balance)

D> 0E - D 0<E [16]

Adjust the volume balance between the direct and the processed sound.

“D” or “E” on the display respectively means D(direct sound) or E(effect sound) values of 100.

Low Gain

-12 - +12 [17]

Adjust the gain of the low frequency range.

Hi Gain (High gain)

-12 - +12 [18]

Adjust the gain of the high frequency range.

#Level (Output level)

0 - 127 [20]

Adjust the output level.

 

 

 

28: 3D Delay

[01H, 57H]

This applies a 3D effect to the delay sound. The delay sound will be positioned 90 degrees left and 90 degrees right.

L

EQ

 

Level

 

3D Delay L

 

3D Delay C

 

HF

 

3D Delay R

R

EQ

Dly Tm C (Delay Time Center)

0m - 500m [1]

Adjust the time from the original sound until when the center delay sound begins.

Dly Tm L (Delay Time Left)

0m - 500m [2]

Adjust the time from the original sound until when the left delay sound begins.

Dly Tm R (Delay Time Right)

0m - 500m [3]

Adjust the time from the original sound until when the right delay sound begins.

+Feedback (Delay Feedback) -98% - +98% [4]

Adjust the amount (%) of the center delay sound that will be returned to the input. With negative (-) settings, the phase will be inverted.

Dly Lev C (Delay Level Center)

0 - 127 [5]

Adjust the volume of the center delay sound.

Dly Lev L (Delay Level Left)

0 - 127 [6]

Adjust the volume of the left delay sound.

Dly Lev R (Dely Level Right)

0 - 127 [7]

Adjust the volume of the right delay sound.

HF Damp

315 - 8k/Bypass [8]

This adjusts the frequency at which the high range is cut when the Center Delay sound is returned to the input. If you do not wish to cut the high range, set this to Bypass.

Out (Output Mode)

Speaker/Phones [15]

Specify the method that will be used to hear the sound which is output to the OUTPUT jacks. The optimal 3D effect will be achieved if you select Speaker when using speakers, or Phones when using headphones (p.91).

#Balance (Effect balance)

D> 0E - D 0<E [16]

Adjust the volume balance between the direct and the processed sound.

“D” or “E” on the display respectively means D(direct sound) or E(effect sound) values of 100.

Low Gain

-12 - +12 [17]

Adjust the gain of the low frequency range.

Hi Gain (High gain)

-12 - +12 [18]

Adjust the gain of the high frequency range.

Level (Output level)

0 - 127 [20]

Adjust the output level.

68

Chapter 4. Insertion Effects