Roland SC-88 Pro manual 199

40	1x	0B	00 00 01	00 - 01	Rx. MODULATION	OFF / ON	01		ON
40	1x	0C	00 00 01	00 - 01	Rx. VOLUME	OFF / ON	01		ON
40	1x	0D	00 00 01	00 - 01	Rx. PANPOT	OFF / ON	01		ON
40	1x	0E	00 00 01	00 - 01	Rx. EXPRESSION	OFF / ON	01		ON
40	1x	0F	00 00 01	00 - 01	Rx. HOLD1	OFF / ON	01		ON
40	1x	10	00 00 01	00 - 01	Rx. PORTAMENTO	OFF / ON	01		ON
40	1x	11	00 00 01	00 - 01	Rx. SOSTENUTO	OFF / ON	01		ON
40	1x	12	00 00 01	00 - 01	Rx. SOFT	OFF / ON	01		ON
40	1x	13	00 00 01	00 - 01	MONO/POLY MODE	Mono / Poly	01		Poly
						(=CC# 126 01 / CC# 127 00)
40	1x	14	00 00 01	00 - 02	ASSIGN MODE	0 = SINGLE	SC-88/Native MAP
						1 = LIMITED-MULTI	01		LIMITED-MULTI
						2 = FULL-MULTI	SC-55 MAP
							00	at x=0	SINGLE (Drum Part)
							01	at x≠ 0	LIMITED-MULTI (Normal Part)

*ASSIGN MODE is the parameter that determines how voice assignment will be handled when sounds overlap on identical note numbers in the same channel (i.e., repeatedly struck notes). This is initialized to a mode suitable for each Part, so for general purposes there is no need to change this.

40 1x 15	00 00 01	00 - 02	USE FOR RHYTHM PART	0	= OFF	00	at x≠ 0	OFF (Normal Part)
				1	= MAP1	01	at x=0	MAP1 (Drum Part)
				2	= MAP2

*This parameter sets the Drum Map of the Part used as the Drum Part. This unit can simultaneously (in different Parts) use up to two Drum Maps (MAP1, MAP2). With the ini- tial settings, Part10 (MIDI CH=10, x=0) is set to MAP1 (1), and other Parts are set to normal instrumental Parts (OFF(0)).

Address(H)			Size(H)	Data(H)	Parameter	Description	Default Value (H)	Description
40	1x	16	00 00 01	28 - 58	PITCH KEY SHIFT	-24 - +24 [semitones]	40	0	[semitones]
40	1x	17	00 00 02	08 - F8	PITCH OFFSET FINE	-12.0 - +12.0 [Hz]	08 00	0	[Hz]
40	1x	18#				Use nibblized data.

*PITCH OFFSET FINE allows you to alter, by a specified frequency amount, the pitch at which notes will sound. This parameter differs from the conventional Fine Tuning (RPN #1) parameter in that the amount of frequency alteration (in Hertz) will be identical no matter which note is played. When a multiple number of Parts, each of which has been given a different setting for PITCH OFFSET FINE, are sounded by means of an identical note number, you can obtain a Celeste effect.

40	1x	19	00 00 01	00 - 7F	PART LEVEL	0	- 127	64	100
						(=CC# 7)
40	1x	1A	00 00 01	00 - 7F	VELOCITY SENSE DEPTH	0	- 127	40	64
40	1x	1B	00 00 01	00 - 7F	VELOCITY SENSE OFFSET	0	- 127	40	64
40	1x	1C	00 00 01	00 - 7F	PART PANPOT	-64(RANDOM),		40	0 (CENTER)
						-63(LEFT) - +63(RIGHT)
						(=CC# 10, except RANDOM)
40	1x	1D	00 00 01	00 - 7F	KEYBOARD RANGE LOW	(C-1) - (G9)		00	C-1
40	1x	1E	00 00 01	00 - 7F	KEYBOARD RANGE HIGH	(C-1) - (G9)		7F	G 9
40	1x	1F	00 00 01	00 - 5F	CC1 CONTROLLER NUMBER	0	- 95	10	16
40	1x	20	00 00 01	00 - 5F	CC2 CONTROLLER NUMBER	0	- 95	11	17
40	1x	21	00 00 01	00 - 7F	CHORUS SEND LEVEL	0	- 127	00	0
						(=CC# 93)
40	1x	22	00 00 01	00 - 7F	REVERB SEND LEVEL	0	- 127	28	40
						(=CC# 91)
40	1x	23	00 00 01	00 - 01	Rx.BANK SELECT	OFF / ON		01(00*)	ON(OFF*)

* When "General MIDI System On" is received, Rx.BANK SELECT will be set OFF. When "GS Reset" or "System Mode Set" is received, it will be set ON.

40 1x 24 00 00 01 00 - 01 RX BANK SELECT LSB [88] OFF / ON 01 ON

* When RX BANK SELECT LSB = OFF, Bank Select LSB (Bn 20 11) will be treated as 00H regardless of its value.

40	1x	2A	00 00 02	00	00 - 40 00 - 7F 7F	PITCH FINE TUNE	[88]	-100 - 0 - +100 [cent]	40 00	0
								(= RPN#1)
40	1x	2B#
40	1x	2C	00 00 01	00	- 7F	DELAY SEND LEVEL	[88]	0-127	00	0
								(=CC# 94)

* In MODE-2 (Double module mode), DELAY SEND LEVEL cannot be used.

Chapter 8. Appendix 197