●Delay parameter function

*Delay cannot be used when Double Module Mode (p.116) is selected.

❍Delay (Delay Type)

You can choose from 10 types of delay.

Delay1 Delay2 Delay3

These are conventional delays. 1, 2 and 3 have progressively longer delay times.

Delay4

This is a delay with a rather short delay time.

Pan Delay1 Pan Delay2 Pan Delay3

The delay sound moves between left and right. This is effective when listening in stereo. 1, 2 and 3 have progressively longer delay times.

Pan Delay4

This is a rather short delay with the delayed sound moving between left and right. It is effective when listening in stereo.

Delay to Reverb

Reverb is added to the delay sound which moves between left and right. It is effective when listening in stereo.

Panning Repeat

The delay sound moves between left and right, but the pan positioning is different than the effects listed above. It is effective when listening in stereo.

When you change the Delay Type, the following parameter values will automatically change. This is so that the parameter values will have the settings most appropriate for the selected Delay Type. You can select these parameters (p.51) and modify the values to adjust the effect to your taste.

❍Dly Pre-LPF (Delay Pre Low Pass Filter)

0 — 7

A low pass filter can be applied to the sound coming into the delay to cut the high frequency range. Higher values will cut more of the high frequencies, resulting in a more mellow delay sound.

❍Dly Time C (Delay Time Center) 0.1ms —1.0s

The delay effect of this unit allows you to set three delay times; center, left and right (when listening in stereo). Delay Time Center sets the delay time of the delay located at the center.

❍DlyTRatioL (Delay Time Ratio Left) 4% —500%

This parameter sets the delay time of the delay located at the left as a percentage of the Delay Time Center. (up to a max. of 1.0s)

❍DlyTRatioR (Delay Time Ratio Right) 4% —

500%

This parameter sets the delay time of the delay located at the right as a percentage of the Delay Time Center. (up to a max. of 1.0s)

❍Dly Level C (Delay Level Center) 0 — 127

This parameter sets the volume of the central delay. Higher values result in a louder center delay.

❍Dly Level L (Delay Level Left) 0 — 127

This parameter sets the volume of the left delay. Higher values result in a louder left delay.

❍Dly Level R (Delay Level Right) 0 — 127

This parameter sets the volume of the right delay. Higher values result in a louder right delay.

❍Dly Level (Delay Level) 0 — 127

This parameter sets the overall volume of the three delays (center, left and right). Higher values result in a louder overall delay.

❍Dly Fback (Delay Feedback) -64 — 0 — +63

This parameter affects the number of times the delay will repeat. With a value of 0, the delay will not repeat. With higher values there will be more repeats. With negative (-) values, the center delay will be fed back with inverted phase. Negative values are effective with short delay times.

❍Dly → Rev (Delay Send Level To Reverb) 0

— 127

This parameter sets the amount of delay sound that is sent to the reverb. Higher values result in more sound being sent.

54

Chapter 3.System Effects