Roland SC-88 Pro manual 196

●System Parameters [88]

Parameters affecting the entire unit, such as how the two MIDI IN connectors will function, are called System Parameters.

<MODEL ID = 42H>
Address(H)	Size(H)	Data(H)	Parameter	Description	Default(H)	Description
00 00 7F	00 00 01	00 - 01	SYSTEM MODE SET	[88]	00	MODE1
				00: MODE-1 (Single module mode)
				01: MODE-2 (Double module mode)
				(Rx. only)

* Refer to "System exclusive messages related to Mode settings" (page 191).

			CHANNEL MSG RX PORT	[88]
00 01 00	00 00 01	00 - 01	BLOCK00	PORT A - B	00	PORT A
:	:	:	:		:
00 01 0F	00 00 01	00 - 01	BLOCK0F	PORT A - B	00	PORT A
00 01 10	00 00 01	00 - 01	BLOCK10	PORT A - B	01	PORT B
:	:	:	:		:
00 01 1F	00 00 01	00 - 01	BLOCK1F	PORT A - B	01	PORT B

*You can modify the receiving MIDI port at which channel messages will be received for each BLOCK. We suggest that normally you use PORT A for BLOCK01-0F, and PORT B for BLOCK10-1F. (In this case there is no need to change the setting.)

*Refer to page 196 for details of each BLOCK.

●Patch parameters

❍Patch common parameters

In MODE-1 (Single module mode) this unit functions as a single sound source module with 32 Parts. In MODE-2 (Double module mode) it functions as two sound source modules with 16 Parts each. The parameters common to all Parts in each module are called Patch Common parameters.

Address(H)		Size(H)	Data(H)	Parameter	Description	Default Value (H)	Descrip-tion
40 00	00	00 00 04	0018 - 07E8	MASTER TUNE	-100.0 - +100.0 [cent]	00 04 00 00	0 [cent]
40 00	01#				Use nibblized data.
40 00	02#
40 00	03#
* Refer to section 5. Supplementary material, "About tuning" (page 208).
40 00	04	00 00 01	00 - 7F	MASTER VOLUME	0 - 127	7F	127
					(= F0 7F 7F 04 01 00 vv F7 )
40 00	05	00 00 01	28 - 58	MASTER KEY-SHIFT	-24 - +24 [semitones]	40	0[semitones]
40 00	06	00 00 01	01 - 7F	MASTER PAN	-63 (LEFT) - +63 (RIGHT)	40	0 (CENTER)
40 00	7F	00 00 01	00	MODE SET	00 = GS Reset
					(Rx. only)

* Refer to "System exclusive messages related to Mode settings" (page 191).

40 01 00	00 00 10	20 - 7F	PATCH NAME	16 ASCII Characters
40 01 : #
40 01 0F#
40 01 30	00 00 01	00 - 07	REVERB MACRO	00: Room 1		04	Hall 2
				01: Room 2
				02: Room 3
				03: Hall 1
				04: Hall 2
				05: Plate
				06: Delay
				07: Panning Delay
40 01 31	00 00 01	00 - 07	REVERB CHARACTER	0	- 7	04	4
40 01 32	00 00 01	00 - 07	REVERB PRE-LPF	0	- 7	00	0
40 01 33	00 00 01	00 - 7F	REVERB LEVEL	0	- 127	40	64
40 01 34	00 00 01	00 - 7F	REVERB TIME	0	- 127	40	64
40 01 35	00 00 01	00 - 7F	REVERB DELAY FEEDBACK	0	- 127	00	0
40 01 37	00 00 01	00 - 7F	REVERB PREDELAY TIME	[88] 0	- 127[ms]	00	0

*REVERB MACRO is a macro parameter that allows global setting of reverb parameters. When you select the reverb type with REVERB MACRO, each reverb parameter will be set to the most suitable value.

*REVERB CHARACTER is a parameter that changes the reverb algorithm. The value of REVERB CHARACTER corresponds to the REVERB MACRO of the same number.

*In MODE-2 (Double module mode), REVERB PREDELAY TIME cannot be used.

194 Chapter 8. Appendix