Roland SC-88 Pro ■Part parameters for sound editing, 1. Make sure that the [ALL] indicator is dark, 2. Use the PART [l] [r] buttons to select a Part

■Part parameters for sound editing

On this unit, you can modify the values of a variety of parameters in order to create the sound most suitable for your playing. A “parameter” is something that affects the sound. The process of modifying parameter values is called “editing.” Sound parameters affect the volume, timbre and pitch of the sound.

You can set the following parameters.
Vibrato	:	Rate	Depth	Delay
Filter	:		Cutoff Frequency	Resonance
Envelope	:	Attack Time	Decay Time	Release Time

●Procedure

1. Make sure that the [ALL] indicator is dark.

If it is lit, press the [ALL] button to turn it off.

2. Use the PART [l] [r] buttons to select a Part.

3. Press the [SELECT] button to select the parameter (vibrato, filter, enve- lope) you wish to edit, and use the corresponding set of [l] [r] buttons to modify the value.

4. Simultaneously pressing both [l] [r] buttons used to set Vibrato, Filter or Envelope will cause the setting status of that parameter to appear graphically in the display.

Simultaneously press both buttons again, and the previous display will reappear.

		1	2
			PART	INSTRUMENT
		ALL
			LEVEL	PAN
		MUTE
			REVERB	CHORUS
		SC-55
		MAP	KEY SHIFT	MIDI CH
		SC-88
		MAP
			DELAY
		VIB RATE	VIB DEPTH	VIB DELAY
USER			CUTOFF	RESONANCE
INST	SELECT	ATTACK	DECAY	RELEASE
				4
EFX	ON/OFF	EFX TYPE	EFX PARAM	EFX VALUE
	3	Vibrato	Vibrato	Vibrato
		Rate	Depth	Delay
			Filter	Filter
			Cutooff	Resonance
			Frequency
		Envelope	Envelope	Envelope
		Attack Time	Decay Time	Release Time

Chapter 2. Parts and paramters 31