Roland SC-88 Pro manual 77

Hi Gain (High gain )	-12 - +12	[18]
Adjust the high frequency gain.
Level (Output level )	0 - 127	[20]
Adjust the output level.
42: EH → Flanger (Enhancer →	Flanger)
	[02H, 07H]

This effect connects an enhancer and a flanger in series.

L	Enhancer	EQ
	Flanger	Balance
R	Enhancer	EQ

+EH Sens (Enhancer Sensitivity )	0 - 127 [1]
Adjust the sensitivity of the enhancer.
EH Mix (Enhancer Mix level )	0 - 127 [2]

Adjust the ratio with which the overtones generated by the enhancer are combined with the direct sound.

FL Dly (Flanger pre delay ) 0 - 100m [6]

Adjust the time delay from when the direct sound begins until the flanger sound is heard.

FL Rate (Flanger rate ) 0.05 - 10.0 [7]

Adjust the modulation speed of the flanger effect.

FL Depth (Flanger depth ) 0 - 127 [8]

Adjust the modulation depth of the flanger effect.

FL Fb (Flanger Feedback level ) -98% - +98% [9]

Adjust the proportion (%) of the flanger sound that is fed back into the effect. Negative (-) settings will invert the phase.

#FL Bal (Flanger balance) D> 0E - D 0<E [10]

Adjust the volume balance between the sound which passes through the flanger and the sound which does not. With a setting of D>0E, only the enhancer sound will be output, and with a setting of D 0<E, the enhancer sound which passes through the flanger will be output. “D” and “E” respectively indicate D (dry sound) and E (effect sound) values of 100.

Low Gain	-12 - +12	[17]
Adjust the low frequency gain.
Hi Gain (High gain )	-12 - +12	[18]
Adjust the high frequency gain.
Level (Output level )	0 - 127	[20]
Adjust the output level.
43: EH → Delay (Enhancer →	Delay) [02H, 08H]

This effect connects an enhancer and a delay in series.

L Enhancer EQ

	Delay	Balance
R	Enhancer	EQ

+EH Sens (Enhancer Sensitivity )	0 - 127 [1]
Adjust the sensitivity of the enhancer.
EH Mix (Enhancer Mix level )	0 - 127 [2]

Adjust the ratio with which the overtones generated by the enhancer are combined with the direct sound.

Dly Time (Delay time ) 0 - 500m [6]

Adjust the time delay from when the direct sound begins until the delay sound is heard.

Dly Fb (Delay feedback level ) -98% - +98% [7]

Adjust the proportion (%) of the delay sound that is fed back into the delay input. Negative (-) settings will invert the phase.

Dly HF (Delay HF damp ) 315 - 8k/Bypass [8]

Adjust the frequency above which delayed sound fed back to the delay input will be cut. If you do not wish to cut the high frequencies of the delay feed- back, set this parameter to Bypass.

#Dly Bal (Delay balance ) D> 0E - D 0<E [10]

Adjust the volume balance between the sound which passes through the delay and the sound which does not. With a setting of D>0E, only the enhancer sound will be output, and with a setting of D 0<E, the enhancer sound which passes through the delay will be output.

“D” or “E” on the display respectively means D(direct sound) or E(effect sound) values of 100.

Low Gain	-12	- +12 [17]
Adjust the low frequency gain.
Hi Gain (High gain )	-12	- +12 [18]
Adjust the high frequency gain.
Level (Output level )	0	- 127 [20]
Adjust the output level.
44: Cho → Delay (Chorus → Delay)	[02H, 09H]

This effect connects a chorus and a delay unit in series.

L	EQ
Chorus	Delay
R	EQ
Cho Dly (Chorus pre delay )	0 - 100m [1]

Adjust the time delay from when the direct sound begins until the chorus sound is heard.

Chapter 4. Insertion Effects 75