Wah Peak

0 - 127 [3]

Adjust the way in which the wah effect will be applied to the region of the center frequency. Lower settings will produce a wah effect in a broad area around the center frequency, and higher settings will produce a wah effect in a narrower area around the center frequency.

Wah Sw (Wah Switch)

Off/On [4]

Turn Wah on/off.

 

<OD (Overdrive/Distortion)>

 

OD Sel (OD Select)

Odrv/Dist [5]

Select either Overdrive or Distortion.

 

#OD Drive

0 - 127 [6]

Adjust the depth of distortion. The volume will change together with the depth of distortion.

OD Amp (OD Amp Simulator Type)

 

Small/BltIn/2-Stk/3-Stk [7]

Select the type of guitar amp

 

Small

: small amp

 

BltIn

: single-unit type amp

2-Stk : large double stack amp

3-Stk : large triple stack amp

OD Amp Sw (OD Amp Switch)

Off/On [8]

Turn OD Amp on/off.

 

OD L Gain (OD Low Gain)

-12 - +12 [9]

Adjust the low-range gain for the overdrive (or dis-

tortion) sound.

 

OD H Gain (OD High Gain)

-12 - +12 [10]

Adjust the high-range gain for the overdrive (or dis-

tortion) sound.

 

OD Sw (OD Switch)

Off/On [11]

Turn overdrive or distortion on/off.

<CF (Chorus/Flanger)>

 

CF Sel (CF Select)

Chorus/Flangr [12]

Select either Chorus or Flanger.

CF Rate

 

0.05 - 6.40 [13]

Adjust the modulation speed for the chorus or

flanger.

 

 

CF Depth

 

0 - 127 [14]

Adjust the modulation depth for the chorus or

flanger.

 

 

CF Fb (CF Feedback)

-98% - +98% [15]

Adjust the amount (%) of the flanger sound that is returned to the input. Negative (-) values will invert the phase.

In the case of Chorus, this will have no effect.

CF Mix

0 - 127 [16]

Adjust the volume of the chorus or flanger sound.

<Dly (Delay)>

 

 

Dly Time (Delay Time)

0m - 635m

[17]

Adjust the time from the original sound until when

the delay sound is heard.

 

 

Dly Fb (Delay Feedback Level)

0 - 127

[18]

Adjust the amount of the delay sound that is

returned to the input.

 

 

Dly Mix (Delay Mix)

0 - 127

[19]

Adjust the volume of the delay sound.

Level (Output level )

0 - 127 [20]

Adjust the output level.

51: Clean Gt Multi1 (Clean Guitar Multi1)

[04H, 03H]

Clean Guitar Multi 1 connects Compressor (Cmp), Equalizer (EQ), Chorus or Flanger (CF), and Delay (Dly) effects in series.

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cmp

 

EQ

 

CF

 

 

Delay

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<Cmp (Compressor)>

 

 

 

 

 

Cmp Atck (Compressor Attack)

0 - 127 [1]

Adjust the time over which the sound will rise after it

is input.

 

 

 

 

 

 

 

 

 

 

 

Cmp Sus (Compressor Sustain)

0 - 127 [2]

Adjust the time over which low-level sounds are boosted until they reach a specified volume.

Increasing the value will shorten the time. When the value is modified, the level will also change.

Cmp Level (Compressor Level)

0 - 127 [3]

Adjust the volume of the compressor sound.

Cmp Sw (Compressor Switch)

Off/On

[4]

Turn the compressor on/off.

 

 

<EQ (Equalizer)>

 

 

EQ L Gain (EQ Low Gain)

-12 - +12

[5]

Adjust the low-range gain of the equalizer.

EQ M Fq (EQ Mid Frequency)

200 - 6.3k

[6]

Set the center frequency for the equalizer mid-

range.

 

 

 

EQ M Q (EQ Mid Q)

0.5/1.0/2.0/4.0/9.0

[7]

Adjust the width of the area centered at the EQ M Fq setting in which the gain will be affected. The area affected will become narrower as this value is increased.

80

Chapter 4. Insertion Effects