RT H Fast (RTRT High Frequency Fast Rate) 0.05 - 10.0 [13]

Adjust the speed of the high-range rotor for the high-speed (Fast) setting.

RT Hi Accl (RT High Frequency Accelaration)

0 - 15 [14]

Adjust the time over which the rotation speed of the high-range rotor will change from low-speed to high-speed (or high-speed to low-speed) rotation. Smaller values will require greater time to reach the new rotational speed.

RT Hi Lev (RT High Frequency Level)

0 - 127 [15]

Adjust the volume of the high-range rotor.

RT Sept (RT Separation)

0 - 127 [16]

Adjust the spatial spread of the rotary sound.

#RT Speed

Slow/Fast [17]

Simultaneously switch the rotational speed of both the low-range and the high-range rotors.

Slow : Slow down the rotation to the specified speeds (RT L Slow parameter / RT H Slow parameter values).

Fast : Speed up the rotation to the specified speeds (RT L Fast parameter / RT H Fast parameter values).

Level (Output level )

0 - 127 [20]

Adjust the output level.

 

 

 

48: GTR Multi 1 (Guitar Multi1)

[04H, 00H]

Guitar Multi 1 connects Compressor (Cmp), Overdrive or Distortion (OD), Chorus or Flanger (CF), and Delay (Dly) effects in series.

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cmp

 

OD

 

CF

 

 

Delay

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<Cmp (Compressor)>

 

 

 

 

 

Cmp Atck (Compressor Attack)

0 - 127 [1]

Adjust the time over which the sound will rise after

input.

 

 

 

 

 

 

 

 

 

 

 

Cmp Sus (Compressor Sustain)

0 - 127 [2]

Adjust the time over which low-level sounds are boosted until they reach a specified volume.

Increasing the value will shorten the time. When the value is modified, the level will also change.

Cmp Level (Compressor Level)

0 - 127 [3]

Adjust the volume of the compressor sound.

Cmp Sw (Compressor Switch)

Off/On [4]

Turn the compressor on/off.

<OD (Overdrive/Distortion)>

 

 

OD Sel (OD Select)

Odrv/Dist

[5]

Select either Overdrive or Distortion.

 

 

+OD Drive

0 - 127

[6]

Adjust the depth of distortion. The volume will change together with the depth of distortion.

OD Amp (OD Amp Simulator Type)

 

Small/BltIn/2-Stk/3-Stk [7]

Select the type of guitar amp.

 

Small

: small amp

 

BltIn

: single-unit type amp

2-Stk : large double stack amp

3-Stk : large triple stack amp

OD Amp Sw (OD Amp Switch)

Off/On [8]

Turn OD Amp on/off.

 

OD L Gain (OD Low Gain)

-12 - +12 [9]

Adjust the low-range gain.

 

OD H Gain (OD High Gain)

-12 - +12 [10]

Adjust the high-range gain.

 

OD Sw (OD Switch)

Off/On [11]

Turn Overdrive or Distortion on/off.

<CF (Chorus/Flanger)>

 

CF Sel (CF Select)

Chorus/Flangr [12]

Select either Chorus or Flanger.

CF Rate

 

0.05 - 6.40 [13]

Adjust the speed of modulation

 

CF Depth

 

0 - 127 [14]

Adjust the depth of modulation.

 

CF Fb (CF Feedback)

-98% - +98% [15]

Adjust the amount (%) of the flanger sound that is returned to the input. Negative (-) values will invert the phase.

In the case of Chorus, this will have no effect.

CF Mix

0 - 127 [16]

Adjust the volume of the chorus or flanger sound.

<Dly(Delay)>

Dly Time (Delay Time)

0m - 635m [17]

Adjust the time from the original sound until when the delay sound is heard.

Dly Fb (Delay Feedback Level)

0 - 127 [18]

Adjust the amount of the delay sound that is

returned to the input.

 

#Dly Mix (Delay Mix)

0 - 127 [19]

Adjust the volume of the delay sound.

Level (Output level )

0 - 127 [20]

Adjust the output level.

78

Chapter 4. Insertion Effects