
Setting Default Copy Options
When making a copy, you can choose from several options, such as copy quantity, copy type, zoom rate and print order. Some of these options can be set to their most frequently used modes. When a document is copied, the default copy options will be activated unless otherwise changed by using the Copy button on the front panel. See page 4.14 for details.
1.Press Setup on the front panel. The display shows the first menu; DATE & TIME.
2.Press Menu repeatedly until you find ‘SYSTEM SETUP’.
3.Press Start/Enter to access the System Setup menu. The first option, ‘RINGER VOLUME’ appears.
4.Press Menu until you find ‘DEF. COPY TYPE’.
5.Press Option repeatedly until you find the desired mode:
•Select
•Select
•Select
6.Press Menu repeatedly to find ‘DEF. REDUC/ENLAR’.
7.Enter the desired zoom rate using the number keypad. You can set the zoom rate from 25% up to 200%.
8.Press Menu to find ‘DEF. COLLATE’.
9.Press Option repeatedly to set the collation on or off. When this menu is set to ON, multiple copies print in sets. For example, if you are making two copies of a three page document, the pages print in this order: 1, 2, 3, 1, 2, 3.
OFF
1
1
1
2
2
2
ON
1
2
3
3
2
1
10. Press Start/Enter to save the setting. Then, to return to Standby mode, press Stop.