Using the Manual Feeder

To load a single envelope, card stock, or specialty paper, use the manual input slot. When you use the manual input slot, you must feed one piece of media at a time. Manual feeding provides a straight-through paper path helpful when printing on heavy paper or when experiencing paper jam with the automatic paper feeder.

Manual input slot

Note: Make sure that you select the Manual Feeder for Paper Source and the correct paper size and type from your software application before starting your print job. See page 5.10.

1.Place the print media in the manual input slot and slide it to far left until it stops. Then slide it into the slot as far as it will go.

Note: For envelopes, load with the flap side facing away from you. The stamp area is on the right side. The end of the envelope with the stamp area enters the feeder last. Do not feed stamped envelopes. The stamp is shown for placement only.

2.In your computer, start printing of the document.

3.For more than one page, manually feed the next sheet.

Printing 5.7

Page 106
Image 106
Samsung 4700 manual Using the Manual Feeder