6. Select YES or NO by pressing Option, then Start/Enter.

If you want to send to more than one location, select YES and repeat steps 4 and 5.

Note: You cannot use Group dial numbers for another fax number.

Or,

To send to one location or when you complete the last fax number setting, select NO and press Start/Enter.

7.The display asks you to enter a name. If you want to assign a name to the transmission, enter the name. If not, skip this step.

For details on how to enter the name using the number keypad, see page 4.17.

8.Press Start/Enter. The display shows the current time and asks you to enter the time when the fax is to be sent.

CURRENT 10:30 AM

START 10:30 AM

9.Enter the time by using the number keypad, select AM or PM by pressing Option, then press Start/Enter.

10.The document will be scanned into memory. The display shows the memory capacity and the number of pages being stored.

11.The machine returns to Standby mode and the display alternates between messages to remind that you are in Standby mode and that a Delayed Transmission is set.

Note: To cancel the operation reserved in memory, see ‘Canceling a Scheduled Operation’ on page 4.31.

Stand-alone Fax 4.25

Page 86
Image 86
Samsung 4700 manual Current 1030 AM