Samsung 4700 manual Loading Paper for Receiving Faxes, Receiving Automatically in FAX Mode

Loading Paper for Receiving Faxes

The instructions for loading paper in the paper input tray are the same whether you are printing, faxing, or copying, except that faxes can only be printed on letter-, A4-, or legal-sized paper. See “Loading Paper” on page xx for instructions.

After loading paper for receiving faxes, set the paper size to the size of paper you normally load in the paper input tray. SF-4700 Series product uses this setting when printing reports and determining autoreduction for incoming faxes. See page xx to set the paper size.

Note: The printing function does not use this setting. If you are loading special-sized media only for your current print job, do not change this setting. After you have finished printing, reload the original paper.

Receiving Automatically in FAX Mode

The SF-4700 is preset to FAX mode at the factory. If you have changed the fax mode, take the following steps to receive faxes automatically:

1.Press Receive Mode/Contrast on the front panel, then Option until the display shows ‘FAX’.

2.When you receive a call, the machine answers the call on a specified number of rings and receives a fax automatically. To change the number of rings. See ‘Setting User-Selectable System Options’ on page 4.34.

To adjust the ringer volume, see ‘Setting Ringer Volume’ on page 4.1.

Receiving Automatically in ANS/FAX Mode

For this mode, you MUST attach an answering machine to the EXT jack on the back of your machine (see page 8.1).

1.Press Receive Mode/Contrast on the front panel until the display shows ‘ANS/FAX.’

4.12 Stand-alone Fax