3.Tap Network notification again to remove the check mark and deactivate this feature.

WPS Button Connection

The WPS (Wi-Fi Protected Setup) button is a standard for easy and secure wireless network set up and connections. To use WPS, the connecting device must support WPS and be compatible with Wi-Fi Protected Access (WPA) security. WPS can automatically set up a random network name and WPA wireless security for wireless Wi-Fi phones, routers, access points, computers, adapters, and other electronic devices.

WPS allows you to push buttons instead of entering a network name and wireless security PIN.

1.Press and then tap

(Settings) Wireless and network Wi-Fi settings.

2.Tap WPS button connection.

3.Press the WPS button on your Wi-Fi access point within 2 minutes.

Manually Adding a Wi-Fi Network

1.Press and then tap

(Settings) Wireless and network Wi-Fi settings.

2.Tap Wi-Fito turn it on.

3.Tap Add Wi-Fi network.

4.Enter the SSID (Service Set Identifier) and Security settings then tap Save.

Note: An SSID is a unique key which identifies a wireless LAN. Its purpose is to stop other wireless equipment from accessing your LAN — whether accidentally or intentionally. To communicate, wireless devices must be configured with the same SSID.

Bluetooth settings

In this menu you can activate Bluetooth, view or assign a device name, activate your phone so other Bluetooth devices can discover it, or scan for other, available Bluetooth devices with which to pair.

Activating Bluetooth

Press and then tap (Settings) Wireless and network

Bluetooth settings and tap Bluetooth to turn it on.

Note: Bluetooth must be enabled prior to use.

184

Page 188
Image 188
Samsung GH68-37463A user manual WPS Button Connection, Manually Adding a Wi-Fi Network, Activating Bluetooth