196
2. Place the phone on a level surface and tap
Calibrate
. The phone adjusts the level of
the accelerometer. During the calibration
process a green circle appears on-screen
and the center circle adjusts to the center
position.
Power Saving Mode
This feature allows you both automatically set
the phone to use a power saving mode and
configure additional power saving options
manually, all in an effort to conserve battery
power.
1. Press ➔ and then tap
(
Settings
) ➔
Power saving mode
.
2. Confirm appears at the top of the
screen. This indicates the power saving
mode is active.
To automatically enable power saving options:
1. Press ➔ and then tap
(
Settings
) ➔
Power saving mode
.
2. Tap
Use Power saving mode
to enable this
feature when the battery level is low.
3. Tap
Power saving mode on at
to assign the
“battery low” level at which the power
saving mode is activated. It is at this level
that the automatic power saving function
will “kick in”.
4. Tap
OK
to store the new battery level.
To activate additional power saving features:
1. Activate Power saving mode.
2. Tap any of the available fields to activate
additional power saving parameters.
Choose from:
•Turn Off Wi-Fi
to disable Wi-Fi when it is not
connected to an AP.
• Turn Off Bluetooth
to disable Bluetooth when
not in use or actively transmitting data.
• Turn Off GPS
to disable the GPS location system
when not in use.
• Turn off Sync
to disable the feature when the
phone is not synchronizing with the server.
• Brightness
to enable or disable the adjustment
of screen brightness. This field must be enabled
before being able to adjust the brightness value.
• Brightness
to select the brightness percentage
value. For more information, refer to
“Adjusting
Screen Brightness”
on page 195.
• Screen time-out
to adjust the time delay before
the screen turns off.
• Power saving tips
to display additional on-
screen power saving information.