Schneider Electric AP9635 manual Status LED, Condition Description, Link-RX/TX 10/100 LED

Status LED

This LED indicates the status of the Management Card.

Condition	Description
Off	One of the following situations exists:
	• The Management Card is not receiving input power.
	• The Management Card is not operating properly. It may need to be repaired or
	replaced. Contact APC Worldwide Customer Support. See “APC Worldwide
	Customer Support” on page 96.
Solid green	The Management Card has valid TCP/IP settings.
Solid orange	A hardware failure has been detected in the Management Card. Contact APC
	Worldwide Customer Support. See “APC Worldwide Customer Support” on page 96.
Flashing green	The Management Card does not have valid TCP/IP settings.1
Flashing orange	The Management Card is making BOOTP requests.1
Alternately flashing	If the LED is alternately flashing slowly, the Management Card is making DHCP2
green and orange	requests.1
	If the LED is alternately flashing rapidly, the Management Card is starting up.

1.If you do not use a BOOTP or DHCP server, see the Network Management Card Installation and Quick Start Manual provided in printed format and on the Network Management Card Utility CD to configure the TCP/IP settings of the Management Card manually.

2.To use a DHCP server, see “TCP/IP and Communication Settings” on page 54.

Link-RX/TX (10/100) LED

This LED indicates the network status.

Condition	Description
Off	One or more of the following situations exist:
	• The Management Card is not receiving input power.
	• The cable that connects the Management Card to the network is disconnected or defective.
	• The device that connects the Management Card to the network is turned off or not
	operating correctly.
	• The Management Card itself is not operating properly. It may need to be repaired or
	replaced. Contact APC Worldwide Customer Support. See “APC Worldwide Customer
	Support” on page 96.
Solid green	The Management Card is connected to a network operating at 10 Megabits per second
	(Mbps).
Solid orange	The Management Card is connected to a network operating at 100 Mbps.
Flashing green	The Management Card is receiving or transmitting data packets at 10 Mbps.
Flashing orange	The Management Card is receiving or transmitting data packets at 100 Mbps.

Network Management Card User’s Guide 6