eventlog
Access: Administrator, Device User
Description: View the date and time you retrieved the event log, the status of the UPS, and the status of sensors connected to the Management Card. View the most recent device events, and the date and time they occurred. Use the following keys to navigate the event log:
Key | Description |
|
|
ESC | Close the event log and return to the command line interface. |
|
|
ENTER | Update the log. Use this command to view events that were recorded after you last retrieved the |
| log. |
|
|
SPACEBAR | View the next page of the event log. |
BView the preceding page of the event log. This command is not available at the main page of the event log.
DDelete the event log. Follow the prompts to confirm or deny the deletion. Deleted events cannot be retrieved.
exit
Access: Administrator, Device User
Description: Exit from the command line interface session.
format
Access: Administrator only
Description: Reformat the file system of the Management Card and erase all security certificates, encryption keys, configuration settings, and the event and data logs.
Warning: Use caution when issuing the format command. This command reformats the file system of the Management Card, deleting all security certificates, encryption keys, configuration settings, and the event and data logs.
Note: To reset the Management Card to its default configuration, use the resetToDef command.
17 | Network Management Card User’s Guide |
