Option

Argument

Description

 

 

 

-output

<phase#> all

Display the output measurements for the chosen phase of the UPS.

 

 

Typing “all” displays the information for all phases of the UPS.

 

 

 

 

voltage current load

Specify the output measurement for the ups command.

 

power percload pf

Example: ups -output 2 percload

 

frequency all

Displays the percentage of load for phase 2 of the UPS.

 

 

 

-batt

 

Display the battery status of the UPS

 

 

 

-about

 

Displays information about the UPS.

 

 

 

-al

<c w>

Display all existing alarms. Specifying “c” or “w” limits the display to

 

 

either Critical (c) or Warning (w) alarms.

 

 

 

user

Access: Administrator only

Description: Configure the user name and password for each account type, and configure the inactivity timeout.

For information on the permissions granted to each account type (Administrator, Device User, and Read-Only User), see “Types of user accounts” on page 3.

Option

Argument

Description

 

 

 

-an

<admin name>

Set the case-sensitive user name for each account type. The maximum

-dn

<device name>

length is 10 characters.

-rn

<read-only name>

 

 

 

 

-ap

<admin password>

Set the case-sensitive password for each account type. The maximum

-dp

<device password>

length is 32 characters. Blank passwords (passwords with no

-rp

<read-only password>

characters) are not allowed.

 

 

 

-t

<minutes>

Configure the time (3 minutes by default) that the system waits before

 

 

logging off an inactive user.

 

 

 

Example: To change the Administrator user name to XYZ, type:

user -an XYZ

To change the Administrator password to XYZ, type:

user -ap XYZ

Network Management Card User’s Guide

26

Page 35
Image 35
Schneider Electric AP9635 manual User