Schneider Electric AP9635 Event Log, Temperature Units, and Log-In, Color-code event log text

Event Log, Temperature Units, and Log-In Page

Path: Administration > General > Preferences

Color-code event log text

This option is disabled by default. Select the Event Log Color Coding check box to enable color-coding of alarm text recorded in the event log. System-event entries and configuration-change entries do not change color.

Text Color	Alarm Severity
Red	Critical: A critical alarm exists, which requires immediate action.
Orange	Warning: An alarm condition requires attention and could jeopardize your data or equipment if
	its cause is not addressed.
Green	Alarm Cleared: The conditions that caused the alarm have improved.
Black	Normal: No alarms are present. The Network Management Card and all connected devices are
	operating normally.

Change the default temperature scale

Select the temperature scale (Fahrenheit or Celsius) in which to display all temperature measurements in this user interface.

Specify the UI language

You can specify the default language for the user interface with the Language field. This can be set when you log on also. From the drop-down box, select one of the languages displayed.

Note: You can also specify different languages for e-mail recipients and SNMP trap receivers. See “E-mail recipients” on page 75 and “Trap Receivers” on page 76.

Specify a default login page

Configure the Web page that will display by default when any user logs in.

Network Management Card User’s Guide 74