Schneider Electric AP9635 manual Ftp, Option Argument Definition, Help, Modbus

ftp

Access: Administrator only

Description: Enable or disable access to the FTP server. Optionally, change the port setting to the number of any unused port from 5001 to 32768 for added security.

Option	Argument	Definition
-p	<port number>	Define the TCP/IP port that the FTP server uses to communicate with the
		Management Card (21 by default). The FTP server uses both the specified
		port and the port one number lower than the specified port.
-S	enable disable	Configure access to the FTP server.

Example: To change the TCP/IP port to 5001, type:

ftp -p 5001

help

Access: Administrator, Device User

Description: View a list of all the CLI commands available to your account type. To view help text for

a specific command, type the command followed by the help command: user help

Example 1: To view a list of commands available to a Device User, type:

help

Example 2: To view a list of options that are accepted by the alarmcount command, type:

alarmcount ?

modbus

Access: Administrator only

Description: Manually configure these Modbus settings for the Management Card:

Option	Argument	Description
-p		Display the configured Modbus parameters.
-a	enable disable	Enable or disable the Modbus feature.
-br	9600 19200	Set the baud rate.
-pr	even odd none	Set the parity bit.
-s	<slave # in hex>	Set the Modbus slave address.
-o	master slave	Define the mode of operation for the Modbus feature. (MGE Galaxy
		models only)
-rt	<timeout in mSec>	Set the response timeout in milliseconds for query packets in Master
		mode. (MGE Galaxy models only)

Network Management Card User’s Guide 18