Administration: General Options

Identification

Path: Administration > General > Identification

Define the Name (the device name), Location (the physical location), and Contact (the person responsible for the device) used by InfraStruxure Central and the SNMP agent of the Management Card. These settings are the values used for the MIB-II sysName, sysContact, and sysLocation Object Identifiers (OIDs).

For more information about MIB-II OIDs, see the PowerNet® SNMP Management Information Base (MIB) Reference Guide, available on the Network Management Card Utility CD and the APC Web site, www.apc.com.

The Name and Location fields also identify the device when you register for the Remote Monitoring Service. See “Remote Monitoring Service” on page 77 for more information.

Set the Date and Time

Method

Path: Administration>General>Date & Time>mode

Set the time and date used by the Management Card. You can change the current settings manually or through a Network Time Protocol (NTP) Server:

Manual Mode: Do one of the following:

Enter the date and time for the Management Card.

Select the check box Apply Local Computer Time to match the date and time settings of the computer you are using.

Synchronize with NTP Server: Have an NTP Server define the date and time for the Management Card.

Note: By default, any Management Card on the private side of an InfraStruxure

Central obtains its time settings by using InfraStruxure Central as an NTP server.

Setting

Definition

 

 

Primary NTP Server

Enter the IP address or domain name of the primary NTP server.

 

 

Secondary NTP Server

Enter the IP address or domain name of the secondary NTP server, when a

 

secondary server is available.

 

 

Time Zone

Select a time zone. The number of hours preceding each time zone in the list is the

 

offset from Coordinated Universal Time (UTC), formerly Greenwich Mean Time.

 

 

Update Interval

Define how often, in hours, the Management Card accesses the NTP Server for an

 

update. Minimum: 1; Maximum: 8760 (1 year).

 

 

Update Using NTP Now

Initiate an immediate update of date and time by the NTP Server.

 

 

Network Management Card User’s Guide

72

Page 81
Image 81
Schneider Electric AP9635 manual Administration General Options, Identification, Set the Date and Time, Method