The PowerChute Option

The PowerChute option, available in the left navigation menu of the UPS tab, enables you to use the PowerChute Network Shutdown utility to shut down a maximum of 50 servers on the network that use a client version of the utility.

See these HTML files and flowcharts on the Management Card Utility CD:

PowerChute Network Shutdown Installation Guide in the \pcns folder

PowerChute Network Shutdown Release Notes in the \pcns folder

PCNS Shutdown Behavior.pdf, PCNS Low-Battery Shutdown Behavior.pdf, and PCNS Maximum Shutdown Time Negotiation.pdf in the \trouble folder

PowerChute Network Shutdown clients

The PowerChute Network Shutdown software must be installed on each client you add.

Click Add Client for a field in which to enter the IP address of a new PowerChute Network Shutdown client. The list can contain the IP addresses of up to 50 clients.

To delete a client, click the IP address of that client in the list, and then click Delete Client.

Note: When you install a PowerChute Network Shutdown client on your network, it is added to the list automatically, and when you uninstall a PowerChute Network Shutdown client, it is removed from the list automatically.

Network Management Card User’s Guide

34

Page 43
Image 43
Schneider Electric AP9635 manual PowerChute Option, PowerChute Network Shutdown clients