Schneider Electric AP9635 manual PortSpeed, Prompt, Quit

portSpeed

Access: Administrator

Description:

Option	Arguments	Description
-s	auto 10H 10F	Define the communication speed of the Ethernet port. The auto command
	100H 100F	enables the Ethernet devices to negotiate to transmit at the highest possible
		speed. See “Port Speed” on page 57 for more information about the port speed
		settings.

Example: To configure the TCP/IP port to communicate using 100 Mbps with half-duplex communication (communication in only one direction at a time), type:

portspeed -s 100H

prompt

Access: Administrator, Device User

Description: Configure the command line interface prompt to include or exclude the account type of the currently logged-in user. Any user can change this setting; all user accounts will be updated to use the new setting.

Option	Argument	Description
-s	long	The prompt includes the account type of the currently logged-in user.
	short	The default setting. The prompt is four characters long: APC>

Example: To include the account type of the currently logged-in user in the command prompt, type:

prompt -s long

quit

Access: Administrator, Device User

Description: Exit from the command line interface session.

Network Management Card User’s Guide 20