Schneider Electric AP9635 manual Tls

tls

Access: Administrator only

Description: Manually configure the TLS settings for the Management Card. TLS is an optional remote monitoring service available on the MGE Galaxy 300 and MGE Galaxy 7000 UPS systems.:

Option	Argument	Description
-p		Display the configured parameters for the tls command
-a	enable disable	Enable or disable the TLS feature.
-m	<slave number in hex>	Identify the valid alarms that cause an alert to be sent to the TLS
		service.
	<call cause mask in
	hex>
-t	<primary secondary>	Determine what primary or secondary number to call to establish a
		TLS connection. The telephone number should be configured with
	<telephone#>
		country code, area code, and number. Only used for master
		configuration - a slave UPS can store the information, but it will not
		be used.
-si	<# of connected UPS>	Store the number of UPS systems connected to the Master system,
		and the slave IDs of each connected UPS in hexadecimal format.
	<slave ID1 in hex>
	<slave ID2 in hex>
	<slave ID3 in hex>...
-id	<slave ID in hex>	Store the slave ID of the UPS in hexadecimal format.
	<id>	Five character unique ID of the UPS.
-d	<delay in seconds>	Specify delay before second connection if first attempt is
		unsuccessful.
-test	<appearance	Create a test alarm. Only alarms specified by the Call Cause mask
	disappearance>	will be raised.
	<bit position>	Specify the bit position (0 - 15) that will be set in the appearance
		and disappearance register.
-initstr	<apc mge any other	Set the modem INIT string.
	string>
-dialstr	<apc mge any other	Set the modem DIAL string.
	string>
-ResetToDef		Restore the default settings for the TLS feature.

Network Management Card User’s Guide 24