How to Use the Tabs, Menus, and Links
Tabs
In addition to the tab for the Home page, the following tabs are displayed. Click a tab to display a set of menu options:
•UPS: Display UPS status, configure PowerChute Network Shutdown, and view information about the UPS.
•Sensor: View and configure temperature sensor data. (Only present if a Dry Contact Sensor (AP9810), Temperature Sensor (AP9335T), or Temperature and Humidity Sensor (AP9335TH) is connected.)
•Logs: View and configure event and data logs.
•Administration: Configure security, network connection, notification, and general settings.
Menus
Left navigation menu. Each tab (except the tab for the home page) has a left navigation menu, consisting of headings and options:
•If a heading has indented option names below it, the heading itself is not a navigational link. Click an option to display or configure parameters.
•If a heading has no indented option names, the heading itself is the navigational link. Click the heading to display or configure parameters.
Top menu bar. The Administration tab has a selection of menu options on the top menu bar. Select one of the menu options to display its left navigation menu.
Quick Links
At the lower left on each page of the interface, there are three configurable links. By default, the links access the URLs for these Web pages:
•Link 1: The home page of the APC Web site
•Link 2: Demonstrations of American Power Conversion
•Link 3: Information on Remote Monitoring Services
To reconfigure the links, see “Configure Links” on page 75.
31 | Network Management Card User’s Guide |
