Schneider Electric AP9635 manual Identify up to four e-mail recipients

E-mail recipients.

Path: Administration>Notification>E-mail>recipients

Identify up to four e-mail recipients.

Setting	Description
To Address	The user and domain names of the recipient. To use e-mail for paging, use the e-mail address
	for the recipient’s pager gateway account (for example, myacct100@skytel.com). The pager
	gateway will generate the page.
	To bypass the DNS lookup of the mail server’s IP address, use the IP address in brackets
	instead of the e-mail domain name, e.g., use jsmith@[xxx.xxx.x.xxx] instead of
	jsmith@company.com. This is useful when DNS lookups are not working correctly.
	NOTE: The recipient’s pager must be able to use text-based messaging. The MGE Galaxy
	300, MGE Galaxy 7000, Symmetra PX 250, and Symmetra PX 500 UPS devices do not
	support paging.
E-mail	Enables (by default) or disables sending e-mail to the recipient.
Generation
SMTP Server	Select one of the following methods for routing e-mail:
	• Local: Through the Management Card’s SMTP server. This setting (recommended) ensures
	that the e-mail is sent before the Management Card’s 20-second time-out, and, if necessary,
	is retried several times. Also do one of the following:
	• Enable forwarding at the Management Card’s SMTP server so that it can route e-mail to
	external SMTP servers. Typically, SMTP servers are not configured to forward e-mail.
	Check with the administrator of your SMTP server before changing its configuration to
	allow forwarding.
	• Set up a special e-mail account for the Management Card to forward e-mail to an external
	mail account.
	• Recipient: Directly to the recipient’s SMTP server. With this setting, the Management Card
	tries to send the e-mail only once. On a busy remote SMTP server, the time-out may prevent
	some e-mail from being sent.
	When the recipient uses the Management Card’s SMTP server, this setting has no effect.
Format	The long format contains Name, Location, Contact, IP address, serial number of the device,
	date and time, event code, and event description. The short format provides only the event
	description.
Language	Chose a language from the drop-down list and any mails will be sent in that language. It is
	possible to use different languages for different users.
User Name	If your mail server requires authentication, type your user name and password here. This
Password	performs a simple authentication, not SSI.
Confirm
Password

E-mail test.

Path: Administration>Notification>E-mail>test

Send a test message to a configured recipient.

Network Management Card User’s Guide 68