Schneider Electric AP9635 manual Radius, Reboot

radius

Access: Administrator only

Description: View the existing RADIUS settings, enable or disable RADIUS authentication, and configure basic authentication parameters for up to two RADIUS servers.

For a summary of RADIUS server configuration and a list of supported RADIUS servers, see “Configuring the RADIUS Server” on page 52.

Additional authentication parameters for RADIUS servers are available at the Web interface of the Management Card. See “RADIUS” on page 51 for more information.

For detailed information about configuring your RADIUS server, see the Security Handbook, available on the Network Management Card Utility CD and at the APC Web site, www.apc.com.

Option	Argument	Description
-a	local	Configure RADIUS authentication:
	radiusLocal	• local—RADIUS is disabled. Local authentication is enabled.
	radius	• radiusLocal—RADIUS, then Local Authentication. RADIUS and local
		authentication are enabled. Authentication is requested from the RADIUS
		server first. If the RADIUS server fails to respond, local authentication is used.
		• radius—RADIUS is enabled. Local authentication is disabled.
-p1	<server IP>	The server name or IP address of the primary or secondary RADIUS server.
-p2		NOTE: RADIUS servers use port 1812 by default to authenticate users. To use a
		different port, add a colon followed by the new port number to the end of the
		RADIUS server name or IP address.
-s1	<server	The shared secret between the primary or secondary RADIUS server and the
-s2	secret>	Management Card.
-t1	<server	The time in seconds that the Management Card waits for a response from the
-t2	timeout>	primary or secondary RADIUS server.

Example 1: To view the existing RADIUS settings for the Management Card, type radius and press

ENTER.

Example 2: To enable RADIUS and local authentication, type:

radius -a radiusLocal

Example 3: To configure a 10-second timeout for a secondary RADIUS server, type:

radius -t2 10

reboot

Access: Administrator

Description: Resets the Management Card.

21 Network Management Card User’s Guide