Schneider Electric AP9635 manual Uio, Ups

uio

Access: Administrator, Device User

Description: This command is available for an AP9631 and AP9635 Network Management Card with a connected Dry Contact I/O Accessory (AP9810).

Option	Argument	Description
-rc <UIO port #>	open close	Change the state of a connected output, and specify the UIO
		(universal input/ output) port number.
-st	<UIO port #>	View the status of the sensors connected to the Dry Contact
	<UIO port #>,	I/O Accessory. To view the status of a specific sensor or
	<UIO port #>	several sensors, type their UIO port numbers.
	<UIO port #>–<UIO port #>
-disc	<UIO port #>	Identify new input contact or output relay connections.
	<UIO port #>,
	<UIO port #>
	<UIO port #>–<UIO port #>

Example 1: To open the output, type:

uio -rc 2 open

Example 2: To view the status of the devices connected to a Dry Contact I/O Accessory that is installed in universal input/ output port 2, type:

uio -st 2

ups

Note: Command is only available on the MGE Galaxy 300 and MGE Galaxy 7000 UPS. Some options may only be available based on the individual UPS model.

Access: Administrator, Device User

Description: View UPS status information.

Option	Argument	Description
-input	<phase#> all	Display the input measurements for the chosen phase of the UPS.
		Typing “all” displays the information for all phases of the UPS.
	voltage current	Specify the input measurement for the ups command.
	frequency all	Example: ups -input 2 frequency
		Displays the frequency for phase 2 of the UPS.
-bypass	<phase#> all	Display the input measurements for the chosen phase of the bypass
		main. Typing “all” displays all phases of the bypass main.
	voltage current	Specify the input measurement for the ups command.
	frequency all	Example: ups -bypass 2 current
		Displays the current for phase 2 of the bypass main.

25 Network Management Card User’s Guide