Schneider Electric AP9635 manual ResetToDef, Snmp, snmp3, System

resetToDef

Access: Administrator only

Description:

Option	Arguments	Description
-p	all keepip	Reset all configuration changes, including event actions and, optionally, TCP/IP
		configuration settings.

Example: To reset all of the configuration changes except the TCP/IP settings for the Management Card, type:

resetToDef -p keepip

snmp, snmp3

Access: Administrator only

Description: Enable or disable SNMP 1 or SNMP 3.

Option	Arguments	Description
-S	enable disable	Enable or display the respective version of SNMP, 1 or 3.

Example: To enable SNMP version 1, type:

snmp -S enable

system

Access: Administrator only

Description:

Option	Argument	Description
-n	<system name>	Define the device name, the name of the person responsible for the device,
		and the physical location of the device. These values are also used by
-c	<system contact>
		InfraStruxure Central and the Management Card’s SNMP agent.
-l	<system location>	NOTE: If you define a value with more than one word, you must enclose the
		value in quotation marks.

Example 1: To configure the device location as Test Lab, type:

system -l “Test Lab”

Example 2: To configure the system name as Don Adams, type:

system -n “Don Adams”

Network Management Card User’s Guide 22