Reset the Management Card
Path: Administration > General > Reset/Reboot
Action | Definition |
|
|
Reboot | Restarts the interface of the Management Card. |
Management |
|
Interface |
|
|
|
Reset All1 | Clear the Exclude TCP/IP check box to reset all configuration values; select the Exclude |
| TCP/IP check box to reset all values except TCP/IP |
|
|
Reset Only1 | TCP/IP settings: Set TCP/IP Configuration to DHCP & BOOTP, its default setting, |
| requiring that the Management Card receive its TCP/IP settings from a DHCP or BOOTP |
| server. See“TCP/IP and Communication Settings” on page 54. |
|
|
| Event configuration: Reset all changes to event configuration, by event and by group, to |
| their default settings. |
|
|
1. Resetting may take up to one minute. The UPS name will not be reset.
Configure Links
Path: Administration > General > Quick Links
Select the Administration tab, General on the top menu bar, and Quick Links on the left navigation menu to view and change the URL links displayed at the bottom left of each page of the interface.
By default, these links access the following Web pages:
•Link 1: The home page of the APC Web site.
•Link 2: A page where you can use samples of American Power Conversion
•Link 3: The home page of the Remote Monitoring Service.
To reconfigure any of the following, click the link name in the Display column:
•Display: The short link name displayed on each interface page
•Name: A name that fully identifies the target or purpose of the link
•Address: Any URL — for example, the URL of another device or server
About the Management Card
Path: Administration > General > About
The hardware information is useful to APC Customer Support for troubleshooting problems with the Management Card. The serial number and MAC address are also available on the Management Card.
Firmware information for the Application Module, the APC OS (AOS), and the Boot Monitor indicates the name, the firmware version, and the date and time each firmware module was created. This information is also useful in troubleshooting and enables you to determine if updated firmware is available at the APC Web site.
Management Uptime is the length of time the interface has been running continuously.
75 | Network Management Card User’s Guide |
