Schneider Electric AP9635 manual Netstat, Ntp, Ping

Option	Argument	Description
-sr	<scan rate in mSec>	Set the scan rate for query packets in Master mode. (MGE Galaxy
		models only)
-rep	<# of repetitions>	Set the number of repetitions for query packets in Master mode. (MGE
		Galaxy models only)
-ResetToDef		Reset the modbus settings to their default values.

netstat

Access: Administrator, Device User

Description: View the status of the network and all active IPv4 and IPv6 addresses.

ntp

Access: Administrator

Description: View and configure the network time protocol parameters.

Option	Argument	Definition
-OM	enable disable	Override the manual settings.
-p	<primary NTP server>	Specify the primary server.
-s	<secondary NTP server>	Specify the secondary server.

Example 1: To enable the override of manual setting, type:

ntp -OM enable

Example 2: To specify the primary NTP server, type:

ntp -p 150.250.6.10

ping

Access: Administrator, Device User

Description: Determine whether the device with the IP address or DNS name you specify is connected to the network. Four inquiries are sent to the address.

Argument	Description
<IP address or DNS name>	Type an IP address with the format xxx.xxx.xxx.xxx, or the DNS
	name configured by the DNS server.

Example: To determine whether a device with an IP address of 150.250.6.10 is connected to the network, type:

ping 150.250.6.10

19 Network Management Card User’s Guide