Schneider Electric AP9635 manual Boot, Option Argument Description

boot

Access: Administrator only

Description: Define how the Management Card will obtain its network settings, including the IP address, subnet mask, and default gateway. Then configure the BOOTP or DHCP server settings.

Option	Argument	Description
-b	dhcp bootp manual	Define how the TCP/IP settings will be configured when the
<boot		Management Card turns on, resets, or restarts. The default setting is
mode>		dhcp. See “TCP/IP and Communication Settings” on page 54 for
		information about each boot mode setting.
-c	enable disable	dhcp boot mode only. Enable or disable the requirement that the
		DHCP server provide the APC cookie.

The default values for these three settings generally do not need to be changed: -v <vendor class>: APC

-i <client id>: The MAC address of the Network Management Card, which uniquely identifies it on the local area network (LAN)

-u <user class>: The name of the application firmware module

Example: To use a DHCP server to obtain network settings:

1.Define the boot mode setting. boot -b dhcp

2.Enable the requirement that the DHCP server provide the APC cookie. boot -c enable

cd

Access: Administrator, Device User

Description: Navigate to a folder in the directory structure of the Network Management Card.

Example 1: To change to the ssh folder and confirm that an SSH security certificate was uploaded to the Management Card:

1.Type cd ssh and press ENTER.

2.Type dir and press ENTER to list the files stored in the SSH folder. Example 2: To return to the main directory folder, type:

cd ..

Network Management Card User’s Guide 14