14. Standard web server
b Time out
This page can also be used to modify the communication monitoring “time out”. Entries must be confirmed by pressing “Enter”. The accepted values are as follows:
0:No communication check. 0.5 to 60.0 s: Time out value.
See the “Configuration - Communication faults” section.
The default time out value is 2 s (display: “2.0”).
The “Time Out” field corresponds to the [time out] (tOUt) parameter.
bMaster
See the “Reserving control” section.
To configure reservation, enter an IP address other than [0.0.0.0] in the “Master” field. This field is equivalent to the [IP Master]
60
