13
7. Ethernet menu
7. 3. Ethernet menu parameters
Code Description
(bdr)M [Bit rate]
Transmission speed detected on the network by the Ethernet card
Type: Display (read-only)
Possible
values:
[0 Mbps] (0M): Automatic detection of the Ethernet network speed
[10 Mbps] (10M): 10 Mbps
[100 Mbps] (100M): 100 Mbps
Default value: [0 Mbps] (0M)
(PAn-)b [DEVICE NAME]
Device name used by FDR service. Accessible with an ATV71 from V1.2 and a ATV61 from V1.3 version.
Use the navigation selector button to increment the character (alphabetical order) and << and >> (F2 and F3) to switch
to the next or previous character respectively. Use F1 to change to ABC, abc, 123, *[-.
Type: Configuration (read and write)
Display (read-only)
Possible values: 16 characters on 1 or 2 lines.
Default value: [0]
(IPC-)b [IP card]
(IPC1)
(IPC2)
(IPC3)
(IPC4)
M [139.160.069.241] (139) (160) (069) (241)
Ethernet card IP address
Type: Configuration (read and write)
Display (read-only) if the address has been supplied by a BOOTP or DHCP server
Possible
values:
• 0 to 255 for each of fields IPC1, IPC2, IPC3 and IPC4.
• If the value is [0.0.0.0] (0) (0) (0) (0), the Ethernet card waits for an address from a BOOTP
orDHCP server.
Note: If you enter a value other than [0.0.0.0] (0) (0) (0) (0), dynamic addressing by a BOOTP
orDHCP server is disabled.
Note: After dynamic addressing by a BOOTP or DHCP server, the value [0.0.0.0] (0)(0)(0)(0)
isreplaced by the address supplied.
Default value: [0.0.0.0] (0) (0) (0) (0)
(IPM-)b [IP Mask]
(IPM1)
(IPM2)
(IPM3)
(IPM4)
M [255.255.254.0] (255) (255) (254) (0)
Subnet mask
Type: Configuration (read and write)
Display (read-only) if the address has been supplied by a BOOTP or DHCP server
Possible
values:
• 0 to 255 for each of fields IPM1, IPM2, IPM3 and IPM4.
• If the value of the IP address [IP card] is [0.0.0.0] (0) (0) (0) (0), the Ethernet card waits for
amask from a BOOTP or DHCP server.
Note: After dynamic addressing by a BOOTP or DHCP server, the current value is replaced by the
address supplied.
Default value: [0.0.0.0] (0) (0) (0) (0)
(IPG-)b [IP Gate]
(IPG1)
(IPG2)
(IPG3)
(IPG4)
M [0.0.0.0] (0) (0) (0) (0)
Gateway IP address
Type: Configuration (read and write)
Display (read-only) if the address has been supplied by a BOOTP or DHCP server
Possible
values:
• 0 to 255 for each of fields IPG1, IPG2, IPG3 and IPG4.
• If the value of the IP address [IP card] is [0.0.0.0] (0) (0) (0) (0), the Ethernet card waits for
amask from a BOOTP or DHCP server.
Note: After dynamic addressing by a BOOTP or DHCP server, the current value is replaced by the
address supplied.
Default value: [0.0.0.0] (0) (0) (0) (0)