13. FDR service
13. 4. Periodic saving
Periodic saving of the drive configuration can be configured on the FDR server in either local configuration or downloaded configuration mode.
In the [1.9 - COMMUNICATION]
•Select: [FDR autosave] (FdrS) = [Yes] (YES).
•Set the [FDR t.autosave] (Fdrt) parameter.
Note: Saving too often risks overburdening the network and adversely affecting its performance (factory setting: 10 min).
13. 5. Other commands
On request, the configuration saved in the FDR server can be downloaded to the drive using the [FDR Action] (FdrA) command = [REST] (rESt).
The saved configuration can be deleted from the FDR server using the [FDR Action] (FdrA) command = [DEL] (dEL).
13. 6. Configuration file
The configuration file, XXXX.prm where XXXX is the DeviceName, is an HTML file which contains the entire drive configuration as a comment.
The HTML format is a simple way of providing the user with a summary of the configuration. An example appears below:
FDR Configuration File
File Revision: 2
ATV Revision: 1.0IE1.0
Catalog number:
CheckSum File: SE92
bLimitations
•The FDR configuration file XXXX.prm coming from an Ethernet V2.1 or V3.0 option board cannot be applied on a V1.1 option board. If applied, an ILF fault will appear.
•The FDR service is able to store the current configuration of the drive, but does not provide the possibility to store
46
