Siemens LU01 instruction manual Display Segment, Description, Programming Icon Index Type

Programming

Operator programmable features are identified by a Point Number and Parameter Number. The Index refers to the Relay Number as identified by the Index Type indicators. Parameter Numbers have a preset Parameter Value for each Index Number.

Program the SITRANS LU01 to obtain the desired RUN mode operation.

Display

In PROGRAM mode, the Index Type, Index Number, Parameter Number, and Parameter Value (as well as a variety of other programming information) may be viewed.

Note that many indicators are specific to certain programming conditions and therefore, all indicators are not displayed at any given time.

index			parameter value	units	auxiliary
					function
index type
transducer
relay
analog output
TS-3
1	2	3	4
index
relay in	program		parameter	invalid	scroll access
service	mode		number	entry	tag

Display Segment

Parameter Number

Index Type

Index

Parameter Value

Percent

Invalid Entry

Auxiliary Function

Scroll Access Tag

Program Mode

Description

the programmable feature the Parameter Value refers to. see chart below

the relay the Parameter Value refers to.

the current value of the Parameter Number for the Index num- ber displayed.

indicates the Parameter Value is displayed in percent. indicates the value entered is questionable. The unit will not accept values out of range.

indicates Auxiliary Function access (applies to only some Parameter Numbers).

indicates the Parameter Value may be scroll accessed. indicates PROGRAM mode is accessed.

Programming

Icon	Index Type
	measurement point or transducer
	relay
	secondary index
	mA output

7ML19985BE02 SITRANS LU01 – INSTRUCTION MANUAL Page 19