Setting the Code for Preset Audio and Visual Components (continued)

1While pressing COMMANDER OFF, press %.

All the component names on the display flash.

2Press the Component Select button for the desired component.

4Aim the Commander at the component and press the 1 key.

When the remote control signal is sent,is displayed on the display.

If it successfully works (power-off for TV, power-on for VCR, DVD, SAT, CBL, AMP, and playback for VD, CD, MD, TAPE), go to Step 5.

If it doesn’t, repeat Steps 3 and 4.

5Press the ENTER key.

A beep sounds, and the code number and “ENTER” appear twice.

Note

It is recommended to write down the code number.

6 Press COMMANDER OFF.

3 Press PROGRAM + or PROGRAM –.

Press PROGRAM + to go to the next code number.

Press PROGRAM – to go back to the previous code number.

12

GB