Sony RM-AV2100T, RM-VL900T Operations, Remote Control, Using Non-Preset

Using Non-PresetRemote ControlOperations

— Learning Function

To operate non-preset components or functions, use the following “learning” procedure to “teach” any of the programmable buttons and keys to operate the functions of another remote control. You can also use the learning function to change the signal of individual keys and buttons after setting the component code number (page 8).

It is useful if you make a memo of the learned key functions in the LCD touch key display table (Refer to the separate volume of “Component code numbers.”).

Note

Some specific remote control signals may not be learned.

Example: To programme the N (Play) signal of your component to the VCR1 N (Play) key of the Commander

1Place the RM-AV2100T head to head with your component’s remote control.

Remote control for your component

about 5 – 10 cm (2 – 4 inches) away

RM-AV2100T

2While pressing COMMANDER OFF, press the Component Select button for the component whose signals are to be learned.

“LEARN” appears and all the learnable keys flash.

Display for PROGRAM, 2 and % buttons