Adding an Extra Function to the Component Select ButtonsProgramming the Power-On command of the selected component (for Sony components only)
When using Sony components, you can programme the Power-on signal for each component on a Component Select button. You can select the desired component and power it on by just pressing that Component Select button.
Example: To programme the TV button
1While pressing COMMANDER OFF, press 2 – and the desired Component Select button.
When the Power-on command is programmed, you will hear a beep and “1 ON” appears on the display. (The display goes off when you release the buttons.)
To clear the Power-on command
Repeat the procedure above. The following display appears.
