Changing the Touch- Key Display

Each Component Select button has two types of touch-key displays: the full- function display and the basic-function display. On the basic-function display, only the keys that are used for basic operations are displayed.

You can modify the basic-function display by setting only the desired keys on it (See “To display only the desired keys.”).

To change the display type

1Press the CHANGE key for any Component Select key.

Each time you press the CHANGE key, the display type changes.

“CHANGE 1” appears when the full- function display is selected.

“CHANGE 2” appears when the basic-function display is selected.

Notes

•You can select only one of the display types for all Component Select buttons.

If you change the display type to the basic- function (“CHANGE 2”) display for a Component Select button, the displays for all other Component Select buttons are also changed to the same type (“CHANGE 2”).

•The number of keys displayed on the full- function display varies according to the component codes preset for the Component Select buttons. For components that have few keys in the full-function display, the basic- function display can be the same as the full one. In this case, you cannot modify the basic-function display (See “To display only the desired keys.”).

•A key that has learned any signal is always displayed both in the full- and basic-function displays.

To display only the desired keys

You can set only the desired keys on the basic-function display. It makes operations easier, because only the keys you will use are displayed.

50

GB