Assigning Other Components to the Component Select Buttons (continued)

Example: To copy the settings of the CD button to the VCR3 button

1While pressing COMMANDER OFF, press VCR3.

The keys for that component (VCR3) flash.

2While pressing VCR3, press CD.

The keys for CD flash.

3Press COMMANDER OFF.

Programming a Frequently Used Key Operation for SYSTEM CONTROL Buttons

In addition to their original System Control functions (page 23), SYSTEM CONTROL 1, 2 or 3 buttons can be programmed to “learn” any remote control signal.

As they operate independently from other buttons, SYSTEM CONTROL 1, 2 or 3 buttons can work as one-touch buttons without any preceding operation such as pressing a Component Select button to select a component.

This is useful if you prefer having the SYSTEM CONTROL button as a “one- touch” button for a single operation rather than executing a series of commands.

Note

Some specific remote control signals may not be learned. Refer to the operating instructions supplied to the specific remote control as well.

38

GB