To clear all signals learned for a specific component
3Press COMMANDER OFF.
Note
For DECK B/A, be sure to display the deck that has a learned signal (“DECK A” or “DECK B”) before you perform the steps above. If you reset the wrong deck, the component codes for both A and B will be reset to the factory settings (page 8).
1While pressing COMMANDER OFF, press the corresponding Component Select button.
When you want to clear signals learned for DECK B/A
Press DECK B/A to display “DECK A”or “DECK B”. You can not clear both decks at the same time.
2While pressing the RESET key, press that Component Select button again.
The learned contents are cleared. The keys for the component return to their original states before learning.
21
GB