Changing the AutoPower-Off Time of theCommander

The Commander is preset at the factory to switch the power off automatically after 10 minutes if left unused (Auto Power-Off). To change this time, perform the following procedure.

You can set the Auto Power-Off time up to 90 minutes, in units of 10 minutes, or disable the Auto Power-Off function.

Note

The Auto Power-Off function only turns off the power of the Commander, but not of the component.

1While pressing COMMANDER OFF, press PROGRAM + and 2–.

The number which shows the current Power-Off time of the Commander stays lit, and other numbers flash.

2Press one of the 1 – 9 keys to select the Auto Power-Off time, or press the 0 key to disable the Auto Power-off function.

For example, to set the Auto Power- Off time to 20 minutes, press the 2 key.

“2” stops flashing and stays lit.

3Press COMMANDER OFF.

47

GB