Assigning Other Components to the Component Select Buttons (continued)

Example: To assign a CD player to the VCR3 button

1While pressing COMMANDER OFF, press PROGRAM – and VCR3.

The number 0 - 9, “A”, “B” and “ENTER” flash.

2Press one of the following keys to select a new component to assign.

In this example, press the 5 key to select CD.

1: VCR

7: MD

2: VD

8: TV

3: SAT

9: CBL

4: AMP

0: DVD

5: CD

A: FM/AM

6: DECK

B: DSP

3Press the ENTER key.

“VCR3” (the original component), “CD” (the new component) and “ENTER” appear twice.

4•If the newly assigned component is a Sony component, press COMMANDER OFF to finish this procedure.

•If you need to set the component code, follow the steps on pages 8 and 9.

•If you need to programme some signals by the “learning” function, follow the Steps 1 to 6 on pages 16 and 17.

Note

If “NG” flashes on the display when you press the Component Select button at Step 1, you can not assign another component because some of the keys or buttons are already programmed with the learning function (page 32).

Try the above procedure again after clearing the learned signals for that component.

36

GB