Sony RM-AV2100T, RM-VL900T Receiving the data

7Press the “ENTER” key.

When the data has been transferred, “TV” and “M” go off. If the data have been successfully transferred, the backlight of the display turns off.

Note

If “NG” appears while sending the data, go back to Step 6 and continue the operation or press COMMANDER OFF to stop the operation.

Notes

•The data of the “learned” signal and the System Control function programmed for a Component Select button cannot be transferred.

You can use the learning function (page 32) to programme the “learned” signal and the System Control functions programmed for a Component Select button on another remote commander.

•Be sure that the receiving remote commander is ready to receive data.

Receiving the data

This Commander can receive the data of another Sony RM-AV2100T or RM-VL900T.

To receive the all data from another remote commander

1While pressing COMMANDER OFF, press PROGRAM – and 2–.

43

Continued GB