Example: To set up a Philips’ TV

1See the tables in the supplied “Component Code Numbers”, and find the three-digit code number for the desired component.

If more than one code number is listed, use the number that is listed first.

For example, to set up a Philips’ TV, you would use the code number 011.

2While pressing COMMANDER OFF, press %.

All the component names in the display flash.

Note on the DVD and SAT/CBL buttons

When you set the component code of the DVD or SAT/CBL button, press repeatedly until the desired component is displayed (“DVD” or “VD”, “CBL” or “SAT”).

Note on the DECK B/A button

You have to set one component code each for DECK A and DECK B. Press the DECK B/A button repeatedly until the desired deck is displayed (“DECK A” or “DECK B”), and set a component code for it.

4Press the three-digit component code number followed by the ENTER key on the touch-key display.

3Press the Component Select button for the desired component.

The selected component remains displayed, and the 0 – 9, ENTER and DISPLAY keys flash.

A beep sounds, and the code number and “ENTER” appear twice.

5If you want to set a code for another component, repeat Steps 3 and 4.

6Press COMMANDER OFF.

9

Continued GB